+86 187 1857 3593
+86 187 1857 3593
Apr. 07, 2022
The sun is shining, the cars are full, and your buddies are waiting for you to pick them up and kick off a long weekend of driving. You're in the driver's seat, you start the car, but your stereo system isn't working properly. It's a daunting problem.
To get you back on the road and listening to your favorite songs, let's break down some of the most common car stereo system problems and their solutions.
The symptoms of this problem can manifest themselves in a number of ways. However, some of the most common symptoms are
A radio that won't turn on
Units that randomly and periodically shut off
Your radio turning off when driving over bumps
Car display and sound turning off at the same time.
The most common causes of these problems are blown fuses, disconnected audio units, loose connections, and disconnected wiring.
When this happens, make sure your amplifier is not switched to protection mode. If the alternator is producing too much power for the amplifier to handle, it may have protected itself from damage by activating protection mode.
The lack of bass in a stereo system can be caused by a number of reasons. The first thing you want to check is the audio controls, such as the balance, faders, and bass controls. Make sure they are properly adjusted. If these settings are correct, you may need to adjust the DSP or EQ to a different setting. Verify the polarity of the left and right speakers to make sure they are accurate. If all else fails, you can try restoring the stereo to factory specifications. Your last resort is to visit your local car audio specialist, as there may be a problem with the installation or speaker connections.
Toyota Corolla/Railing/Lingshang/Asia Lion Car Stereo Supplier
Hissing, whining, buzzing or static sounds from your speakers can be caused by several issues. The first thing you want to make sure is that your receiver is safely grounded. Improper grounding is one of the biggest causes of unwanted noise.
Radio static may be caused by antenna noise. The best way to verify this is to verify that it occurs only when listening to the radio and not the CD, auxiliary or USB functions.
You can minimize the problem by installing an alternator noise filter on the power cord between the battery and the alternator.
A sudden interruption in the sound of a car audio system can be caused by a broken or curled speaker wire. It could also be caused by a damaged amplifier or incorrectly wired amplifier. If all of these checks produce no results, your main unit may have failed. You would be wise to seek professional help from a reputable company.
Problems that occur due to poor grounding can cause your amplifier to cut in and cut out. When the car stereo is turned on, the amplifier will pull more current. If the system's ground is damaged, the amplifier will not be able to pull the required amount of current. This will usually cause the amplifier to go into clipping. Symptoms of this condition are a whining sound from the alternator or poor sound quality.
Clipping is the result of an amplifier whose power has reached its maximum or reached the maximum voltage capability of the signal. If the power is not generated fast enough, the signal may be distorted or clipped. Over time, clipping can become a problem if the continuous power used for loud settings is often insufficient.
9-inch Sunplus-2900 MP5 with CarPlay and Android Auto DSP Car Stereo
When you can't find a solution to your car audio problem, your best bet is always to take it to a professional for a diagnosis. An experienced team can quickly find the solution you need to your problem and get you back on the road with clear sound in no time.
Please contact DINPEI to get your unique carplay solution.
Previous: How to Connect Carplay to Your iPhone and Start It?
Next: The Risks of DIY Car Audio and You Should Seek Professional Help
Address
Building E, Shangshui Cultural Park, Longgang Dist., Shenzhen, China
CUSTOMER SERVICE
+86 187 1857 3593
REQUEST A QUOTE
